Bespoke Internal Biomass Silo
This Biomass project was a for customer moving from wood chip to wood pellets. We had to design, manufacture and install a silo to fit into the etiquette space. The silos capacity was 18 tonnes, 3 meter diameter, fitted with 4 x channel legs and reinforced bracing, the silo also has a 25⁰ roof to keep the overall silo height down. A 360mm diameter wheeled slide outlet was fitted along with a dust collection cyclone. Material used here was Magnelis®.
Atex approved biomass silo
This Biomass project was a for customer using wood pellets to heat a nursery. We had to design, manufacture and install a silo to hold 35 tonnes (54m3). The silo is designed to meet ATEX approved requirements which included explosion panels fitted on the roof of the silo, heavier walls on the silo and closer hole centres. The silo has 10 x channel legs and double reinforced bracing, A 300mm diameter wheeled slide outlet was fitted for an auger conveyor connection. Material used here was Galvanised sheeting
Animal feed mill silos
This project was a for customer who had an animal feed mill. We had to design, manufacture and install a range of silos to approximately 40 tonnes (63m3). The silos are fitted with 8 x channel legs and reinforced channel ring bracing to the top of the legs. Silos are fitted with reinforced blow units to withstand abrasive and regular filling. A 560mm diameter ring outlet was fitted to suit a conveyor. Material used here was Galvanised Sheeting
Woodchip biomass silo
This Biomass project was a for customer using wood chip to heat a nursery. We had to design and manufacture this silo onsite. This silos capacity is 115m3 and the diameter 5.25m. The silo is designed for conveyor filling requirements which included a catwalk and ladder on the silo. The silo is fixed to the ground for emptying with a sweep auger conveyor connection. Large excess doors and level viewing windows installed on the silo. Material used here was Galvanised sheeting
Stainless steel grain storage silos
This project was a for customer who had an animal feed mill. We had to design, manufacture and install a range of silos to approximately 23 tonnes (35m3). The silos are fitted with 8 x channel legs and reinforced channel ring bracing to the top of the legs. Silos are fitted with reinforced blow units to withstand abrasive and regular filling. Silos were delivered and craned onto gantry provided by the customer. Material used here was 304 grade Stainless Steel.
Poultry silo project
This project was a for a poultry farmer that installed two new broiler houses. We had to design, manufacture and install silos to approximately 18 tonnes (27m3). The silo diameters are 3 meters. The silos are fitted with 4 x top hat structural legs and reinforced bracing. A 360mm diameter ring outlet to fit a flexible auger conveyor was fitted. Silos were delivered and pipes brought forward for easy filling. Material used here was Solano® Plastisol steel.
Aluminium plastic storage silos
This project was a for customer in the commercial plastic industry. We had to design, manufacture and install 16 silos with a capacity of 93m3 (60 tonnes) and the diameter is 3.75m. this gives the customer a full storage capacity of almost 1000 tonnes. The silos are fitted with 10 x channel legs and reinforced channel ring bracing to the top of the legs. Silos are fitted with reinforced blow units to withstand abrasive and regular filling. A 300mm diameter butterfly outlet for a suction system was fitted. Silos were delivered and craned into position. Material used here was Aluminium.
Malt barley storage silos
This project was a for customer storing malt barley. We had to design, manufacture and install 4 silos with a capacity of 93m3 (60 tonnes) and the diameter is 3.75m. The silos are fitted with 10 x channel legs and reinforced channel ring bracing to the top of the legs. Silos are fitted with a catwalk and ladder to accommodate a bucket conveyor for filling and emptying. A 300mm diameter wheeled slide outlet was fitted. Silos were delivered and craned into position. Material used here was Galvanised sheeting.
Pig silo project
This project was a for a pig farmer that wanted to feed four different feeds. We had to design, manufacture and install 3 silos, 2 x single chamber 25 tonnes and 1 x double chamber 25 tonnes. The silo diameters are 3 meters. The silos are fitted with 8 x top hat structural legs and reinforced bracing. On the single chamber silos, a 430 mm diameter outlet is fitted to fit a flexible auger conveyor. On the split silo we have fitted a 560mm diameter pair of shorts to accommodate 2 flexible auger conveyors. Material used here was Solano® Plastisol steel.
Poultry weighing and biomass silos
This project was a for a poultry farmer that installed two new broiler houses and biomass wood pellet boilers. We had to design, manufacture and install silos to approximately 20 tonnes (30m3). The silo diameters are 3 meters. The silos are fitted with 4 x channel legs and reinforced bracing. A 360mm diameter ring outlet to fit a flexible auger conveyor was fitted. A Q MAC Weigh house was installed where feed is conveyed to and weighed out accurately for significant farm management. Silos were delivered and pipes brought forward over the roof of the link house for easy filling. Material used here was Magnelis®.
Dairy Farm Split Silo
This project was a for a Dairy farmer that installed 4 robots for milking. We had to design, manufacture and install a double chamber silo with a capacity of 25 tonnes (41m3) so that the farmer can use two different feeds. The silos diameter is 3 meters. The silos are fitted with 8 x top hat structural legs and reinforced bracing. A 560mm diameter ring outlet and a pair of shorts are fitted to accommodate two flexible auger conveyors. Material used here was Magnelis®.
