Q MAC Weighing House

The Weighing House Silo is a house kitted out with feed weighing equipment. Normally positioned in front of large silos and feed is conveyed in where it can be weighed out accurately for excellent farm management and feeding programs.

Silo Technical Data Chart

Contact us today!


Contact the sales team to find out more on 02886737312

All Q MAC silos come standard with the following Features

High roof cone and a removable automatic ventilation roof lid

The high roof and lid are designed to allow hot steam evaporate from the silo reducing risk of condensation.

Removable 600 x 600mm inspection hatch fitted in the side wall of ALL silos

This allows excess for recommended annual inspections.

Large level viewing windows

The large window give a realistic view of what content is in the silo, all windows are UV protected

Structural designed silo legs

We use only structural legs that are designed and manufactured to suit our silos.

Smooth silo walls

We use smooth sheeting rather than corrugated or spiral lock seam. To gives the silo an inner surface with no restrictions for material flow.

Stainless steel bolts

We fabricate our silos using only stainless steel bolts, nuts and EPDM rubber backed washers , this means that fixings will never rust or corrode. We use bolts rather than rivets, because we use cup square bolts (flat domed heads) to help meal flow in the bottom cone of all silos.

High roof cone and a removable automatic ventilation roof lid

The high roof and lid are designed to allow hot steam evaporate from the silo reducing risk of condensation.

 

Removable 600 x 600mm inspection hatch fitted in the side wall of ALL silos

This allows excess for recommended annual inspections.

 

Large level viewing windows

The large window give a realistic view of what content is in the silo, all windows are UV protected.

 

Structural designed silo legs

We use only structural legs that are designed and manufactured to suit our silos.

 

Smooth silo walls

We use smooth sheeting rather than corrugated or spiral lock seam. To gives the silo an inner surface with no restrictions for material flow.

 

Stainless steel bolts

We fabricate our silos using only stainless steel bolts, nuts and EPDM rubber backed washers , this means that fixings will never rust or corrode. We use bolts rather than rivets, because we use cup square bolts (flat domed heads) to help meal flow in the bottom cone of all silos.

More about our range of Products

Facebook
Twitter
Instagram